The semi blackout and blackout fabric of roller blinds
1-99 square meters:$12.99
100-499 square meters:$9.99
>=500 square meters:$6.99
Control system:bead rope/motorized/spring
Opening and closing method:Upper Open
Applicable Window Type:American window
The rolling curtain is aimed at the traditional fabric left-right opening and closing curtain. It is named after the whole curtain is rolled up and down by the rolling tube. Rolling curtain has good window tightness, so it is also very convenient to use. Rolling curtain can be roughly divided into the following categories:
Sunshine/semi blackout/blackout fabric rolling blinds in living room:
1. Sunshine fabric: the rolling curtain of sunshine fabric is woven by special methods, among which the rolling curtain composed of polyester and PVC is the most common. The roller blinds of this fabric can not only effectively block ultraviolet rays, but also see the outdoor scenery through the roller shutter.
2. Semi transparent fabric: as the name suggests, the roller shutter of semi transparent fabric can block eyes. Although you can't see outdoor scenery and people, it can effectively block ultraviolet rays when light shines in. However, the roller shutter of this fabric is relatively common, and its fabric is slightly worse.
3. Full shading fabric: full shading roller blinds is the most common kind of office decoration, which has good shading and heat insulation effect. At present, the roller shutter of this fabric is divided into silver coated full shading, fly coated full shading and white coated full shading.
1. Bead roller shutter:
the bead roller shutter is connected with a bead chain pull transmission system. The bead roller shutter is composed of shaft wheel, bead wheel, torsion spring, roller, support plate and other accessories. When operating the roller shutter mechanism, it is optional to drive the bead wheel by pulling the pull bead. At this time, the force in the release direction of the torsion spring is that the axle wheel rotates along the reel and the support plate drives the reel to rotate together, which is the movement of the roller shutter fabric up and down.
2. Spring roller shutter:
spring roller shutter is named after the built-in spring in the tube, also known as semi-automatic roller shutter. According to different operations, it can be divided into traditional pull rope spring roller shutter, pull bead spring roller shutter, one control two spring roller shutter and assistant spring roller shutter.
3. Electric roller shutter:
it is an electric roller shutter powered by a tubular motor. Its operation is simpler, and the curtain can be opened and closed by turning on the power supply.
The electric roller shutter is easy to operate, quiet and stable. It is the lifting and upgrading product of the manual roller shutter. The motor is directly installed in the aluminum alloy coil, which not only reduces the volume of the curtain box and the transmission link of the force, but also avoids the influence of the outside world on the motor and increases the reliability of the mechanism. The coil is made of high-quality aluminum alloy, which has high strength and is not easy to deform; The surface is anodized to prevent aging and corrosion. The installation support is made of high-strength alloy steel, which has high bending and shear strength to ensure the safety and reliability of the installation and use of the mechanism.
Installation of roller shutter
I Install roller shutter accessories:
The beading head can rotate freely, and the left and right sides can be interchanged at the same time. Determine the vertical direction of the head and the left and right direction of the pull bead. Of course, the head can also be installed according to the interests and placement of the room owner.
II Installation of head:
There are two methods to install the head, corresponding to two installation schemes respectively.
First type: Interior
Put the finished rolling curtain into the curtain frame, lock the left and right heads tightly on the top of the window frame with screws, and lift the rotatable module on the head without pull beads.
Second: exterior decoration
Similarly, put the finished rolling shutter outside the window frame, find a suitable position, lock the left and right head tightly on the window frame or wall with screws, and lift the rotatable module on the head without pull bead.
III Installation track:
1. First put the right end of the upper rail into the head with pull bead, and then put the left end of the upper rail into the head without pull bead.
2. Buckle the opened rotatable module and confirm that the roller shutter will not fall or move, then the installation is completed.
3. Gently pull down the bead curtain on the front side, and the roller curtain will rise automatically.
4. Pull down the bead curtain on the back side to control the pull of the roller shutter.